oreorite.blogg.se - Washing machine pan

#Washing machine pan how to

Then it is necessary to unscrew the screws on the plate located in the upper part of the case.

The screws located under the plugs should be unscrewed.

Further there are special caps on the walls and are pulled from the place with the help of an awl.

First, the screws located at the bottom of the back wall of the case are loosened and the top cover removed.

The fact is that she has no removable side walls.ĭisassemble the washing machine should be phased

Unscrewing the engine from the tank, after which you can begin to parse individual parts.īy the way, one must separately say about removing the rear wall of the washing machine Zanussi.

Then you can carefully pull them out and remove the tank. You can do this with a wrench – unscrew all the lower bolts that secure the shock absorber to the body of the styralka. This is to ensure that the weight of the car slightly decreased and did not interfere with the removal of the tank. Removing the counterweights located at the top and bottom of the tank.Next, the wires from the cable are disconnected. First, remove all the hoses that lead to the tank by unscrewing the clamps with a screwdriver. Remove the rear wall of the machine by unscrewing the bolts that secure it.Also it is necessary to disconnect a wire of the lock of the lock of the hatch. Then the self-tapping screws that connect the front panel to the door are unwound, after which the panel is slightly raised and removed. First you need to detach the cuff and tuck it inside. Dismantling the front wall of the unit together with the loading hatch.First, pull out the powder tray, and then the panel itself turns off. Next, the lid should be slightly pushed from itself and as soon as it moves, you can remove it. This can be done by unscrewing two self-tapping screws on the back of the machine. Regardless of the brand of the washing machine, the process of parsing it proceeds approximately in the same sequence.ĭisassembly of the washing machine includes the following stages:

#Washing machine pan how to

Instruction how to disassemble a washing machine: the main stages 5 How to disassemble a washing machine Zanussi (video).4 Tips: how to disassemble the engine from a washing machine.3 Dismantling of the washing machine and its features.2 Manual: How to remove the control panel on the washing machine.1 Instruction how to disassemble a washing machine: the main stages.I was wondering if anybody has any opinions about my idea. This way, if it leaks, all the water will be directed to the floor drain, there's no plastic drip tray anymore, and it will look a lot nicer. I was thinking of squaring the area off with 2x4's, put a flange in the floor drain, put some of that waterproof membrane they use on holmes on homes (dikstra, dykstra?), then tiling over it. I then started thinking thismorning of maybe building a tray area myself. I love the idea of having the washer on the 2nd floor, but I'm always uneasy about it because of accidents like this. When my wife did the washer, guess what happened. We just had the washer repaired, and the repairman forgot to put the drain hose back in the drain. It sometimes moves around with the washer and causes the drain pipe to come out of the floor drain. The house did come with one of those plastic drain pans for the washer, but it's a piece of junk. We just moved into our newly built house and the washer and dryer are on the 2nd floor.